300/500V SR Insulated & Overall Screened Control Cables (Multipair)

FFX200 05SOZ1-U(PH30/60)(CU/SR/OSCR/LSZH 300/500V Class 1)

FFX200 05SOZ1-R(PH30/60)(CU/SR/OSCR/LSZH 300/500V Class 2)

APPLICATION

The cables are primarily intended for use in the following applications:
BS 5266-1 for emergency lighting of premises
BS 5839-1 for fire detection and fire alarm systems in and around building
BS 5839-8 for voice alarm systems
BS 5839-9 for emergency voice communication systems.

images/300/500V SR Insulated & Overall Screened Control Cables (Multipair).jpg images/SR Insulated Screened Control Cables .jpg

STANDARDS

  • Basic design to BS 7629-1

FIRE PERFORMANCE

Circuit Integrity IEC 60331-21; BS 6387 CWZ; DIN VDE 0472-814(FE180); BS 8434-1 (30mins); BS 5839-1 Clause 26 2d; CEI 20-36/2-1; SS229-1; NBN C 30-004(cat. F3); NF C32-070-2.3(CR1)
Circuit Integrity with mechanical shock EN 50200(PH30/60); CEI 20-36/4-0
Circuit Integrity with mechanical shock & water spray EN 50200 annex E
System circuit integrity DIN 4102-12, E30 depending on lay system
Flame Retardance (Single Vertical Wire Test) EN 60332-1-2; IEC 60332-1-2; BS EN 60332-1-2; VDE 0482-332-1 ; NBN C 30-004 (cat. F1); NF C32-070-2.1(C2); CEI 20-35/1-2; EN 50265-2-1*; DIN VDE 0482-265-2-1*
Reduced Fire Propagation(Vertically-mounted bundled wire & cable test) EN 60332-3-24 (cat. C); IEC 60332-3-24; BS EN 60332-3-24; VDE 0482-332-3; NBN C 30-004 (cat. F2); NF C32-070-2.2(C1); CEI 20-22/3-4; EN 50266-2-4*; DIN VDE 0482-266-2-4
Halogen Free IEC 60754-1; EN 50267-2-1; DIN VDE 0482-267-2-1; CEI 20-37/2-1; BS 6425-1*
No Corrosive Gas Emission IEC 60754-2; EN 50267-2-2; DIN VDE 0482-267-2-2; CEI 20-37/2-2 ; BS 6425-2*
Minimum Smoke Emission IEC 61034-1&2; EN 61034 -1&2; DIN VDE 0482-1034-1&2; CEI 20-37/3-1&2; EN 50268-1&2*; BS 7622-1&2*
No Toxic gases NES 02-713; NF C 20-454

Note: Asterisk * denotes superseded standard.

VOLTAGE RATING

450/750 V

CABLE CONSTRUCTION

Conductors Plain annealed copper wire, solid according to IEC 60228 class 1, stranded according to IEC 60228 class 2.
Insulation Fire resistant special ceramized silicone rubber compound type EI2 as per BS 7655-1.1
Cabling The cores are cabled together in concentric layers with suitable non-hygroscopic fillers
Overall screen Aluminum/polyester tape with tinned copper drain wire
Circuit Protective Conductor or Drain Wire Uninsulated tinned copper conductor of the same section and class as the insulated conductors in the 2-, 3-and 4-core cables. Drain wire of 0.5mm2 tinned copper conductor is provided in cables of more than 4 conductors
Sheath Thermoplastic LSZH compound type LTS3 as per BS 7655-6.1 (Thermosetting LSZH compound type SW2-SW4 as per BS 7655-2.6 can be offered.). UV resistance, hydrocarbon resistance, oil resistance, anti rodent and anti termite properties can be offered as option

COLOUR CODE

Insulation colour as per BS 7629  
Sheath Colour Orange (other colours upon request)

PHYSICAL AND THERMAL PROPERTIES

Temperature range during operation (fixed state) -30°C – +90°C
Temperature range during installation (mobile state) -20°C – +50°C
Minimum bending radius 6 x Overall Diameter

ELECTRICAL PROPERTIES

Dielectric test 2500 V r.m.s. x 5' (core/core)
Insulation resistance ≥300 MΩ x km (at 20°C)
Short circuit temperature 350°C

CONSTRUCTION PARAMETERS

Cable Code No. of Pairs X Cross Section Nominal Insulation Thickness Nominal Sheath Thickness Nominal Overall Diameter Approx.Weight
mm2 mm mm mm kg/km
2 Pairs
FFX200 05SOZ1-U (PH30/60) 2P1.0 2x2x1.0 0.6 1.1 13.5 480
FFX200 05SOZ1-U (PH30/60) 2P1.5 2x2x1.5 0.7 1.2 15.5 590
FFX200 05SOZ1-R (PH30/60) 2P1.5 2x2x1.5 0.7 1.2 16.2 579
FFX200 05SOZ1-R (PH30/60) 2P2.5 2x2x2.5 0.8 1.3 18.0 750
3 Pairs
FFX200 05SOZ1-U (PH30/60) 3P1.0 3x2x1.0 0.6 1.2 14.5 675
FFX200 05SOZ1-U (PH30/60) 3P1.5 3x2x1.5 0.7 1.2 16.5 810
FFX200 05SOZ1-R (PH30/60) 3P1.5 3x2x1.5 0.7 1.2 17.5 730
FFX200 05SOZ1-R (PH30/60) 3P2.5 3x2x2.5 0.8 1.3 19.5 1045

ELECTRICAL PROPERTIES

Conductor Operating Temperature 90°C
Ambient Temperature 30°C

Current-Carrying Capacities (Amp)

Conductor cross-sectional area Reference Method A (enclosed in conduit in thermally insulating wall etc) Reference Method B (enclosed in conduit on a wall or in trunking etc) Reference Method C (clipped direct) Reference Method E (in free air or on aperforated cable tray, horizontal or vertical etc) Touching
1 two-core cable*, single-phase a.c. or d.c. 1 three-or four corecable*, three-phase a.c. 1 two-core cable*, single-phase a.c. or d.c. 1 three-or four corecable*, three-phase a.c. 1 two-core cable*, single-phase a.c. or d.c. 1 three-or four corecable*, three-phase a.c. 1 two-core cable*,s ingle-phase a.c. or d.c. 1 three-or four corecable*, three-phase a.c.
1 2 3 4 5 6 7 8 9
mm2 A A A A A A A A
1.0 14.5 13 17 15 19 17 21 18
1.5 18.5 16.5 22 19.5 24 22 26 23
2.5 25 22 30 26 33 30 36 32
4 33 30 40 35 45 40 49 42

Voltage Drop (Per Amp Per Meter)

Conductor cross-sectional area Two-core cables, d.c. Two-core cable, single-phase a.c. Three-or four core cable,three-phase a.c.
1 2 3 4
mm2 mV/A/m mV/A/m mV/A/m
1.0 46 46 40
1.5 31 31 27
2.5 19 19 16
4 12 12 10

 

 

 

Contact Us

Add the link of current page.

Clear

Submit

Instant Messaging

WhatsApp :

+852 6230 0392

Skype :

Caledonian Cables

live:1cb87739a29fb08c

Wechat :
The personal information you enter is only used to reply to your message, It will not be leaked or used for other purposes.